I removed passenger side valve cover, and hand cranked the motor. I found #6 loose and not moving. I thought I heard tapping coming from both sides. Is there a possibility that two AMF lifters will stick?
top of page
Pour voir cela fonctionner, rendez-vous sur votre site en ligne.
3 commentaires
bottom of page
I did everything you showed me to. The '09 Suburban with 205k miles has the lifter released, DOD deleted, new spark plugs, same old gaskets. She has 38-40 psi oil pressure at idle and 45 psi at 1500rpms. I am so grateful for your time. I'll throw you a bone when I recover financially. Go America!!
Just a lil follow up. It was #6 intake. I hummed the Fibonacci sececence for ten minutes, tapping hard, not so hard rapidly, 1, 1, 3, 5,8,13. taps per session. Trying to produce a spiral of vibrations. It worked. Push rod shot out. Reset the pushrod /lifter with tinks until it tonked. Checked the work, and $$$$$$$$$$.
Boom Booyah. Reusing old gaskets, they look non degraded. The op loss was 6loose VLOm bolts. Cut the inside gaskets out of the gasket, will mod valve cover, awaiting ECU from LS1. Probably be running tomorrow.
It is possible but unlikely. The more likely vehicle to have that happen if it is to happen would be the newer stuff with direct injection. This is because the VLOM is prone to leaking pressure into the lifters when the system is not commanded on.